, ,

Victron BlueSolar MPPT 12/24V Charge Controller 150/85 CAN-Bus


Stock Pending

A charge controller, charge regulator or battery regulator limits the rate at which electric current is added to or drawn from electric batteries. It prevents overcharging and may protect against overvoltage, which can reduce battery performance or lifespan, and may pose a safety risk. It may also prevent completely draining (“deep discharging”) a battery, or perform controlled discharges, depending on the battery technology, to protect battery life. The terms “charge controller” or “charge regulator” may refer to either a stand-alone device, or to control circuitry integrated within a battery pack, battery-powered device, or battery recharge.

R8,197.26 ex. VAT

Stock Pending

PV voltage up to 150 V
The BlueSolar MPPT 150/70 and 150/85 charge controllers will charge a lower nominal-voltage battery from a higher nominal voltage PV array.
The controller will automatically adjust to a 12, 24, 36, or 48V nominal battery voltage.

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT’s tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency
Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).

Flexible charge algorithm
Several preconfigured algorithms. One user programmable algorithm.
Manual or automatic equalisation.
Battery temperature sensor. Battery voltage sense option.

Programmable auxiliary relay
For alarm or generator start purposes

Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
Reverse current protection.

CAN bus
To parallel up to 25 units, to connect to a ColorControl panel or to connect to a CAN bus network

SKU: VICSCC010085000 Categories: , ,
Weight 5.5 kg
Dimensions 43 × 23 × 20 cm

Victron Energy





Charge Current


IP Rating



1 Year

Data Communications Port

VE.Can: two paralled RJ connectors NMEA2000 protocol


12V: 95% / 24V: 96.5% / 36V: 97% / 48V: 97.5%


• PV voltage up to 150 V
• Ultra-fast Maximum Power Point Tracking (MPPT)
• Advanced Maximum Power Point Detection in case of partial shading conditions
• Outstanding conversion efficiency
• Flexible charge algorithm
• Programmable auxiliary relay
• Extensive electronic protection
• CAN bus to parallel up to 25 units.

Data Sheets


Based on 0 reviews

0.0 overall

Be the first to review “Victron BlueSolar MPPT 12/24V Charge Controller 150/85 CAN-Bus”

There are no reviews yet.